NICET Inspection and Testing 3

Question 1

What does an inspector's test valve simulate in a sprinkler system?

Accepted Answer

Operation of a single sprinkler head at the end of the most remote branch line

Answer

Full system discharge

Answer

Fire pump startup

Answer

Dry pipe valve tripping

Question 2

How often must fire extinguisher inspections be conducted according to NFPA 10?

Accepted Answer

Monthly

Answer

Weekly

Answer

Every 6 months

Answer

Annually

Question 3

What is the purpose of a trip test on a pre-action system?

Accepted Answer

Verify the detection system releases the pre-action valve correctly

Answer

Test the fire pump at rated flow

Answer

Check air compressor operation

Answer

Test all sprinkler heads simultaneously

Question 4

According to NFPA 25, how often must backflow preventers on fire protection systems be tested?

Accepted Answer

Annually

Answer

Monthly

Answer

Quarterly

Answer

Every 5 years

Question 5

What action is required when a sprinkler system is found out of service during an inspection?

Accepted Answer

Immediately notify the property owner and AHJ and implement a fire watch

Answer

Document the finding and return at the next scheduled inspection

Answer

Replace all sprinkler heads immediately

Answer

Conduct a full hydrostatic retest

Question 6

Which NICET certification level is typically required to supervise inspection and testing of fire alarm systems?

Accepted Answer

Level III

Answer

Level I

Answer

Level II

Answer

Level IV