Inspection Process and Methodology Flashcards
7 cards from real NHIE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Inspection Process and Methodology flashcards as text
When inspecting a home, in what order should an inspector typically work through the exterior?
Answer: Start at the front door and work clockwise around the perimeter
Working clockwise from the front door is a systematic approach that helps ensure no exterior area is missed.
Which of the following is NOT typically included in a home inspection scope according to NHIE standards?
Answer: Underground fuel storage tanks
Underground fuel storage tanks are excluded from standard home inspections because they are not visible or readily accessible.
An inspector notices a locked door during an interior inspection. What is the correct action?
Answer: Note in the report that the area was not inspected due to restricted access
Inspectors document inaccessible areas in the report rather than forcing access or ignoring them.
What does the term 'readily accessible' mean in the context of a home inspection?
Answer: Areas that can be observed by an inspector without moving obstructions or causing damage
Readily accessible means observable without moving personal property, dismantling systems, or risking damage.
How should an inspector handle a situation where conditions are unsafe for inspection, such as an icy roof?
Answer: Note the unsafe condition and exclude that area from the inspection
Inspectors should not endanger themselves; unsafe conditions are noted in the report as limiting inspection scope.
During an inspection, the inspector discovers evidence of a prior undisclosed renovation. What is the appropriate response?
Answer: Report the visible conditions observed without speculating on permits or code compliance
Inspectors report observed conditions and may note that permits should be verified, but do not make code compliance determinations.
What is the primary purpose of a pre-inspection agreement signed by the client?
Answer: To define the scope, limitations, and terms of the inspection service
The pre-inspection agreement sets mutual expectations about what is and is not included in the inspection.