New Zealand Motorbike Driving Test New Zealand Motorbike Driving Pre-Ride Vehicle Checks 2

Question 1

When checking your front fork seals before a ride, what sign indicates they need immediate attention?

Accepted Answer

Oil residue or wet streaks below the seals

Answer

Oil residue or wet streaks below the fork seals indicate the seals are leaking and need immediate repair before riding.

Question 2

How should you test your front brake lever during a pre-ride check?

Accepted Answer

Squeeze it firmly — it should feel firm and not reach the handlebar

Answer

A correctly adjusted front brake lever should feel firm under hard pressure and never touch the handlebar, indicating proper hydraulic pressure or cable tension.

Question 3

What is the safest way to check if your chain tension is correct?

Accepted Answer

Measure the amount of slack at the midpoint of the chain's lower run

Answer

Chain slack should be measured at the midpoint of the lower run, and the correct amount is specified in your owner's manual — typically 25–35mm for most bikes.

Question 4

Before riding, you notice your rear tyre has a small nail embedded in it but it is still holding pressure. What should you do?

Accepted Answer

Do not ride — have the tyre professionally inspected or replaced

Answer

A nail in a tyre is unsafe regardless of current pressure; the tyre could rapidly deflate while riding, and it must be professionally assessed before you ride.

Question 5

When inspecting your throttle during a pre-ride check, which of the following is a concern?

Accepted Answer

The throttle sticks or returns slowly after being twisted open

Answer

A throttle that sticks or returns slowly can cause unintended acceleration and loss of control, making it a critical safety issue.

New Zealand Motorbike Driving Test Practice Test

New Zealand Motorbike Driving Test Practice Test

New Zealand Motorbike Driving Test New Zealand Motorbike Driving Pre-Ride Vehicle Checks 2