General Requirements and Definitions Flashcards
7 cards from real NEC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 General Requirements and Definitions flashcards as text
NEC Section 110.12 requires electrical equipment to be installed in a:
Answer: Neat and workmanlike manner
Section 110.12 mandates that electrical equipment be installed in a neat and workmanlike manner, ensuring reliable, safe operation.
Under NEC Article 100, a 'dwelling unit' is defined as:
Answer: One or more rooms used as a housekeeping unit with space for eating, living, and sleeping plus permanent provisions for cooking and sanitation
Article 100 defines a dwelling unit as one or more rooms used as a housekeeping unit with space for eating, living, and sleeping along with permanent provisions for cooking and sanitation.
What is the NEC definition of 'interrupting rating'?
Answer: The highest current at rated voltage that a device is identified to interrupt under standard test conditions
Interrupting rating is the highest current at rated voltage that a device is identified to interrupt safely under standard test conditions.
According to NEC Table 110.26(A)(1), what is the minimum working space depth in front of electrical equipment operating at 0–150 V to ground under Condition 1?
Answer: 36 inches (3 ft)
NEC Table 110.26(A)(1) requires a minimum working space depth of 900 mm (3 ft) for voltages of 0–150 V to ground under Condition 1.
The NEC term 'overcurrent' includes which of the following conditions?
Answer: Overload, short circuit, and ground fault
Overcurrent is any current exceeding the rated ampacity of equipment or conductors, and includes overload, short-circuit, and ground-fault conditions.
What does the NEC mean by the term 'authority having jurisdiction' (AHJ)?
Answer: An organization, office, or individual responsible for enforcing the requirements of a code, or their designated representative
The AHJ is defined in Article 100 as the organization, office, or individual responsible for enforcing the requirements of a code, or a designated representative.
Under NEC 110.9, overcurrent protective devices must have an interrupting rating sufficient for the:
Answer: Available fault current at the point of application
NEC 110.9 requires overcurrent protective devices to have an interrupting rating not less than the available fault current at the point in the circuit where they are installed.