Safety Protocols & Compliance Regulations Flashcards
7 cards from real NDT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Protocols & Compliance Regulations flashcards as text
Under OSHA 29 CFR 1910.146, which condition classifies a space as a permit-required confined space in a boiler?
Answer: Contains a hazardous atmosphere or engulfment hazard
OSHA 1910.146 classifies a space as permit-required if it contains or has the potential to contain a hazardous atmosphere, a material that could engulf an entrant, or other serious safety hazards.
Which ASME standard governs the inspection and testing of boilers and pressure vessels used in NDT evaluations?
Answer: ASME Section V
ASME Section V (Nondestructive Examination) establishes requirements and methods for NDT of boilers and pressure vessels.
A boilermaker NDT technician discovers a crack during an inspection but has not yet filed the required documentation. What must happen before work resumes?
Answer: The finding must be documented and reviewed by a qualified inspector before resuming
All findings must be formally documented and reviewed per applicable codes before any work resumes to maintain compliance and safety accountability.
What is the primary purpose of a Job Hazard Analysis (JHA) conducted prior to NDT work on a boiler?
Answer: To identify potential hazards and establish controls before work begins
A JHA systematically identifies hazards associated with each task step and establishes controls to eliminate or mitigate those hazards before work starts.
Which federal agency has authority to enforce radiation safety regulations when radiographic testing (RT) is performed on boilers?
Answer: Nuclear Regulatory Commission (NRC)
The NRC regulates the use of radioactive materials including industrial radiography sources, and states with Agreement State status enforce equivalent rules.
When using magnetic particle testing (MT) near flammable materials in a boiler, what safety precaution is mandatory?
Answer: Eliminate ignition sources and ensure adequate ventilation before applying wet MT fluids
Wet MT fluids are often petroleum-based and flammable; eliminating ignition sources and ventilating the area prevents fire hazards.
A boilermaker NDT technician notices a coworker has bypassed a lockout/tagout (LOTO) device. What is the correct immediate action?
Answer: Stop work, notify the supervisor, and restore LOTO before continuing
LOTO violations require immediate work stoppage and supervisor notification to prevent accidental energization injuries before work can safely resume.