MPOETC Personal Protective Equipment 4

Question 1

An officer's soft body armor has been worn daily for six years. Even though it shows no visible damage, what action is appropriate?

Accepted Answer

Replace it because most manufacturers' warranty and NIJ guidance is five years

Answer

Most soft armor manufacturers warrant their panels for five years; beyond that, fiber degradation may reduce protection even without visible damage.

Question 2

When removing PPE contaminated with a suspected hazardous substance after a call, an officer should remove gloves by:

Accepted Answer

Pulling from the fingertips outward and touching the outer surface minimally

Answer

The recommended technique is to pinch and peel the first glove from the wrist downward so the contaminated outer surface folds inward, avoiding skin contact.

Question 3

Which term describes the rating system for protective eyewear used during firearms qualification or range training?

Accepted Answer

ANSI Z87.1+

Answer

ANSI Z87.1+ (with the plus sign) denotes eyewear that has passed the higher-impact testing tier, commonly required for ballistic and high-velocity debris environments.

Question 4

A body armor carrier that is visibly soiled should be cleaned according to:

Accepted Answer

Manufacturer's care label instructions only

Answer

Only the manufacturer's care instructions should be followed because machine washing on hot, bleach, or dry-cleaning solvents can damage the carrier materials or stitching.

Question 5

Stab-resistant and spike-resistant armor are distinct from ballistic armor primarily because:

Accepted Answer

They are tested against edged and pointed threats, not bullets

Answer

Stab/spike-resistant armor is tested against knife and needle threats using different NIJ standards (NIJ Standard-0115.00) and does not provide equivalent ballistic protection.

MPOETC - ACT 120 Certified Police Officer Practice Test

MPOETC - ACT 120 Certified Police Officer Practice Test

MPOETC Personal Protective Equipment 4