Motor Vehicle Division Vehicle Inspection Standards 2

Question 1

During a vehicle inspection, which brake component is checked to ensure it can hold a stationary vehicle on a slope?

Accepted Answer

Parking brake

Answer

The parking brake (emergency brake) is specifically tested to verify it can hold the vehicle stationary on an incline.

Question 2

What is the minimum tread depth required for front tires on most US inspection standards?

Accepted Answer

4/32 inch

Answer

Front tires typically require a minimum tread depth of 4/32 inch because they are critical for steering control.

Question 3

Which of the following windshield conditions would cause a vehicle to FAIL inspection?

Accepted Answer

A crack obstructing the driver's view

Answer

A crack that obstructs the driver's direct line of vision is a safety hazard and constitutes a mandatory inspection failure.

Question 4

An inspector notices rust around a vehicle's frame rail. When is this considered an inspection failure?

Accepted Answer

Rust that reduces frame strength or causes visible holes

Answer

Frame rust is a failure only when it has compromised the structural integrity of the frame, such as creating holes or weakening load-bearing sections.

Question 5

Which lighting component must emit light visible from at least 500 feet to the rear during a standard vehicle inspection?

Accepted Answer

Tail lights

Answer

Tail lights must be visible from a minimum of 500 feet to the rear so other drivers can see the vehicle at night.

Motor Vehicle Division Practice Test

Motor Vehicle Division Practice Test

Motor Vehicle Division Vehicle Inspection Standards 2