MD-100 100: Network Configuration 5

Question 1

A Windows 10 PC joined to a domain cannot reach the domain controller. The PC can ping external websites by IP. Which tool helps diagnose DNS resolution for the domain?

Accepted Answer

nslookup

Answer

nslookup queries DNS servers directly and can reveal whether the domain controller's hostname resolves correctly.

Question 2

Which Windows 10 feature automatically assigns an IPv6 address to a host without requiring a DHCPv6 server?

Accepted Answer

SLAAC (Stateless Address Autoconfiguration)

Answer

SLAAC uses router advertisements to allow hosts to generate their own IPv6 global unicast addresses without DHCPv6.

Question 3

A Windows 10 user connects to a VPN but cannot access local network resources while connected. What setting likely needs to be disabled?

Accepted Answer

Use default gateway on remote network (split tunneling should be enabled)

Answer

When 'Use default gateway on remote network' is enabled, all traffic routes through the VPN; disabling it enables split tunneling so local traffic uses the local network.

Question 4

Which PowerShell cmdlet displays all IP addresses assigned to network adapters on a Windows 10 PC?

Accepted Answer

Get-NetIPAddress

Answer

Get-NetIPAddress lists all IP addresses (IPv4 and IPv6) configured on all network interfaces.

Question 5

A Windows 10 technician needs to add a static route so that traffic to 10.20.0.0/24 goes through a specific gateway at 192.168.1.254. Which command accomplishes this?

Accepted Answer

route add 10.20.0.0 mask 255.255.255.0 192.168.1.254

Answer

The route add command adds a static route specifying the network, subnet mask, and gateway address.

MD-100 - Microsoft Windows Client Practice Test

MD-100 - Microsoft Windows Client Practice Test

MD-100 100: Network Configuration 5