MCA Certificate of Competency Navigational Bridge Equipment Questions and Answers

Question 1

A UK-flagged vessel is equipped with a Bridge Navigational Watch Alarm System (BNWAS). According to SOLAS Chapter V and enforced by the MCA, what is the primary function of the 'AUTO' mode?

Accepted Answer

To automatically engage when the vessel's heading is controlled by an autopilot or track control system.

Answer

In 'AUTO' mode, the BNWAS is automatically activated when the ship's heading or track is being automatically controlled (e.g., by an autopilot). This is a key requirement under SOLAS V/19, ensuring that the watchkeeper's presence is monitored when they are not actively steering the vessel. The other options describe incorrect functionalities or triggers for the system.

Question 2

The navigating officer on a UK-registered vessel is configuring the safety settings on the Electronic Chart Display and Information System (ECDIS). Which user-defined setting is most critical for providing an advance anti-grounding alarm?

Accepted Answer

The safety contour.

Answer

The 'safety contour' is a critical user-inputted value, typically equal to the ship's draught plus a safety margin (UKC). The ECDIS uses this value to generate an alarm if the vessel's predicted track crosses this depth contour on the electronic chart, serving as the primary automated anti-grounding feature. The other settings relate to display preferences or administrative tasks, not direct, real-time safety alarms.

Question 3

A UK-flagged vessel is involved in a maritime incident. The Marine Accident Investigation Branch (MAIB) requests the data capsule from the Voyage Data Recorder (VDR). Which of the following data sets is required by SOLAS V/20 to be recorded by the VDR?

Accepted Answer

Bridge audio from at least one microphone on the conning station.

Answer

SOLAS V, Regulation 20, as implemented by the UK's Merchant Shipping Regulations, mandates that the VDR must record audio from at least one microphone located on the bridge conning station. This captures conversations, helm orders, and audible alarms critical for accident investigation. While audio from bridge wings is often recorded, it is the conning station microphone that is the specific minimum requirement. Engine data and crew schedules are not part of the mandatory VDR data set.

Question 4

On a vessel subject to UK regulations, the Automatic Identification System (AIS) transmits different types of data. Which of the following is classified as 'static' data?

Accepted Answer

The vessel's Maritime Mobile Service Identity (MMSI) number.

Answer

Static data in AIS refers to information that is programmed into the unit upon installation and only changed infrequently. The MMSI number is a unique identifier for the vessel and is a prime example of static data. Navigational status and rate of turn are 'dynamic' data, automatically updated by the ship's sensors. Destination and ETA are 'voyage-related' data, which are manually updated for each voyage.

Question 5

According to the best practices outlined in the ICS Bridge Procedures Guide, which is widely adopted on UK-flagged vessels, how often should the gyrocompass error be checked by the Officer of the Watch?

Accepted Answer

At least once per watch and after any significant alteration of course.

Answer

Good seamanship and industry best practice, as detailed in the ICS Bridge Procedures Guide, recommend that the gyrocompass error should be determined at least once every watch. It should also be re-checked after any large course alteration or if there is any suspicion that the reading is inaccurate. This ensures the primary heading reference remains accurate throughout the voyage.

MCA CoC Practice Test

MCA CoC Practice Test

MCA Certificate of Competency Navigational Bridge Equipment Questions and Answers