Manitoba Class 5 Learner's Driving Test Highway and Expressway Driving 1

Question 1

When merging onto a Manitoba highway, what is the correct procedure?

Accepted Answer

Use the acceleration lane to match highway speed and merge smoothly into a gap in traffic

Answer

The acceleration lane is designed to allow merging vehicles to match the speed of highway traffic. You should signal, check mirrors and blind spots, and merge smoothly when a safe gap is available.

Question 2

What is the purpose of the deceleration lane when exiting a Manitoba highway?

Accepted Answer

To allow you to reduce speed after leaving the main highway lanes without disrupting traffic flow

Answer

The deceleration lane allows you to exit the main highway traffic flow at highway speed and then reduce speed safely. You should signal, move into the deceleration lane, and then begin slowing down.

Question 3

On a multi-lane Manitoba highway, which lane should you normally drive in?

Accepted Answer

The right lane, using the left lane only for passing

Answer

Manitoba follows the 'keep right except to pass' rule. On multi-lane highways, you should normally drive in the right lane and use the left lane only for passing slower vehicles.

Question 4

What is the minimum following distance recommended on a Manitoba highway at highway speeds?

Accepted Answer

2 seconds

Answer

A minimum 2-second following distance is recommended at highway speeds under ideal conditions. This distance should be increased in poor weather, heavy traffic, or when following large vehicles.

Question 5

On a Manitoba highway, what should you do if you miss your exit?

Accepted Answer

Continue to the next exit and turn around safely

Answer

If you miss your highway exit, continue to the next exit. Never stop, back up, or make a U-turn on a highway. These actions are extremely dangerous and illegal.

Manitoba Driving Practice Test

Manitoba Driving Practice Test

Manitoba Class 5 Learner's Driving Test Highway and Expressway Driving 1