LGV Safe Braking Distances 2

Question 1

How does an unladen LGV compare to a fully loaded LGV in terms of braking?

Accepted Answer

An unladen LGV can brake harder but may experience wheel lock-up more easily — load improves tyre adhesion

Answer

An unladen LGV has less mass but also less tyre contact force, making wheels more susceptible to locking. A loaded LGV has more mass (longer stopping distance) but better tyre adhesion. Both situations require careful brake application.

Question 2

What is the effect of excessive speed on braking distance?

Accepted Answer

Doubling speed quadruples braking distance — the relationship is exponential, not linear

Answer

Braking distance increases with the square of speed (kinetic energy = ½mv²). Doubling speed from 30 to 60 mph increases braking distance by a factor of four. This exponential relationship is why high speed is so dangerous for heavy vehicles.

Question 3

What is 'aquaplaning' and how should an LGV driver respond?

Accepted Answer

When a layer of water builds up under tyres causing loss of steering and braking — ease off throttle, avoid sharp steering or braking

Answer

Aquaplaning occurs when a tyre rides on a layer of water and loses contact with the road surface. There is no steering or braking control. The driver should ease off the throttle gently, avoid steering or braking sharply, and wait for speed to reduce and tyres to regain contact.

Question 4

How does tyre tread depth affect braking distance on a wet road?

Accepted Answer

Worn tyres have reduced ability to channel water away, significantly increasing wet stopping distances

Answer

Tyre tread channels water away from the contact patch. As tread wears, its ability to disperse water reduces, causing the tyre to aquaplane at lower speeds and stopping distances to increase dramatically on wet roads.

Question 5

What is the emergency stopping technique for an LGV with ABS?

Accepted Answer

Apply full brake pressure firmly and maintain it — ABS prevents wheel lock and allows steering

Answer

With ABS, the driver should apply maximum brake pressure firmly and hold it. The ABS system automatically prevents wheel lock-up by modulating brake pressure. Pumping the brakes overrides ABS and reduces effectiveness.

UK LGV Theory Practice Test

UK LGV Theory Practice Test

LGV Safe Braking Distances 2