Safety Compliance & Technical Documentation Flashcards
7 cards from real ITMC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Compliance & Technical Documentation flashcards as text
Which arc flash protection boundary requires all workers within it to wear appropriate arc-rated PPE regardless of their task?
Answer: Arc flash boundary
The arc flash boundary is the distance at which a worker could receive a second-degree burn from an arc flash incident energy of 1.2 cal/cm².
A Piping and Instrumentation Diagram (P&ID) is most commonly used in maintenance to:
Answer: Illustrate the functional relationships between process equipment, piping, and instrumentation
P&IDs show how process equipment, piping, valves, and instruments are interconnected and controlled in an industrial process.
What does GHS stand for in the context of chemical hazard communication?
Answer: Globally Harmonized System of Classification and Labelling of Chemicals
GHS stands for Globally Harmonized System of Classification and Labelling of Chemicals, a UN framework adopted by OSHA in HazCom 2012.
During a machine's preventive maintenance procedure, a technician notices a crack in a structural weld. The correct action is to:
Answer: Document the finding, tag the machine out of service, and escalate to engineering for evaluation
Structural weld defects are safety-critical findings that require engineering evaluation before the equipment can safely return to service.
Which type of maintenance documentation establishes the minimum qualifications and training a technician must have before performing a specific task?
Answer: Competency Matrix or Training Matrix
A competency or training matrix defines which qualifications, certifications, or training are required for each task or piece of equipment.
In the context of industrial safety, what is the purpose of a Job Safety Analysis (JSA)?
Answer: To identify hazards associated with each step of a job and define controls before work begins
A JSA breaks a job into steps, identifies hazards at each step, and documents controls to eliminate or reduce those hazards proactively.
Which ANSI/ISA standard defines the symbols and conventions used in Piping and Instrumentation Diagrams (P&IDs)?
Answer: ANSI/ISA-5.1
ANSI/ISA-5.1 (Instrumentation Symbols and Identification) defines the standard symbols, designations, and identification used in P&IDs.