Safety Compliance & Technical Documentation Flashcards
7 cards from real ITMC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Compliance & Technical Documentation flashcards as text
A maintenance technician is about to service a pneumatic system. What is the correct order of energy isolation steps under OSHA's Lockout/Tagout standard?
Answer: Notify affected employees, shut down equipment, isolate energy, release/restrain stored energy, apply lockout devices
OSHA 29 CFR 1910.147 requires notification, shutdown, isolation, stored energy release, and then lockout device application in that sequence.
Which document type provides step-by-step procedures for safely performing a specific maintenance task on industrial equipment?
Answer: Standard Operating Procedure (SOP)
A Standard Operating Procedure (SOP) provides detailed, step-by-step instructions for performing tasks safely and consistently.
Under NFPA 70E, what is the purpose of an Energized Electrical Work Permit?
Answer: To document justification and safety measures when working on energized electrical equipment
An Energized Electrical Work Permit documents why de-energizing is infeasible and ensures proper PPE and safety measures are in place.
A Safety Data Sheet (SDS) Section 8 provides information primarily about:
Answer: Exposure controls and personal protective equipment requirements
SDS Section 8 (Exposure Controls/Personal Protection) details occupational exposure limits and required PPE for handling the chemical.
When a maintenance technician discovers an undocumented modification to a machine's electrical schematic, what is the most appropriate immediate action?
Answer: Stop work, tag the machine out of service, and report the discrepancy to supervision
Undocumented modifications create unknown hazards; stopping work and reporting ensures safety and triggers proper documentation review.
Which OSHA standard specifically governs the control of hazardous energy (lockout/tagout) for general industry?
Answer: 29 CFR 1910.147
29 CFR 1910.147 is OSHA's Control of Hazardous Energy standard, commonly known as the Lockout/Tagout (LOTO) standard.
In technical documentation, a 'redline' drawing refers to:
Answer: A drawing marked up by hand to show actual as-built conditions versus the original design
A redline drawing shows handwritten or marked corrections reflecting actual field conditions that differ from the original design documents.