Installing and Configuring Windows Server 2012 Exam MCSA 70-410: Installing & Configuring Windows Server 4

Question 1

Which RAID level provides disk striping with parity, requiring a minimum of three disks and tolerating one disk failure?

Accepted Answer

RAID 5

Answer

RAID 5 stripes data with parity across at least three disks, providing fault tolerance against a single drive failure.

Question 2

A user reports they cannot authenticate to the domain from a remote location. Which feature should you configure to allow VPN-based domain authentication?

Accepted Answer

Routing and Remote Access (RRAS)

Answer

RRAS provides VPN connectivity, enabling remote users to authenticate to the domain over an encrypted tunnel.

Question 3

Which Windows Server 2012 feature allows storage to be provisioned from a pool of physical disks, creating virtual disks with resiliency?

Accepted Answer

Storage Spaces

Answer

Storage Spaces pools physical drives to create virtual disks with resiliency options like mirroring and parity.

Question 4

You need to ensure a Windows Server 2012 role service starts automatically after a reboot. Which command sets the service startup type to Automatic?

Accepted Answer

Set-Service -Name <name> -StartupType Auto

Answer

Set-Service with the -StartupType parameter set to Automatic configures a service to start automatically at boot.

Question 5

Which Windows Server 2012 networking feature assigns IPv6 addresses to hosts on a subnet without requiring a DHCPv6 server?

Accepted Answer

Stateless Address Autoconfiguration (SLAAC)

Answer

SLAAC allows IPv6 hosts to automatically configure their addresses using Router Advertisement messages, without a DHCP server.

Installing and Configuring Windows Server 2012 Exam Practice Test

Installing and Configuring Windows Server 2012 Exam Practice Test

Installing and Configuring Windows Server 2012 Exam MCSA 70-410: Installing & Configuring Windows Server 4