IFR Holding Procedures

Question 1

What is the standard turn direction in a holding pattern?

Accepted Answer

Right turns

Answer

Standard holding patterns use right turns unless the procedure specifies otherwise.

Question 2

What are the three types of holding pattern entries recognized by the FAA?

Accepted Answer

Direct, Parallel, and Teardrop

Answer

The FAA recognizes Direct, Parallel, and Teardrop entries, each used based on the aircraft's heading relative to the holding course.

Question 3

How long is the inbound leg of a holding pattern when flying at or below 14,000 feet MSL?

Accepted Answer

1 minute

Answer

At or below 14,000 feet MSL, the inbound leg of a standard holding pattern is 1 minute in duration.

Question 4

What does the abbreviation EFC stand for in IFR holding operations?

Accepted Answer

Expected Further Clearance

Answer

EFC stands for Expected Further Clearance, the time at which a pilot can expect ATC to issue a clearance to proceed beyond the holding fix.

Question 5

What is the maximum holding airspeed for aircraft at or below 6,000 feet MSL?

Accepted Answer

200 knots

Answer

The FAA specifies a maximum holding airspeed of 200 knots indicated airspeed at or below 6,000 feet MSL.

IFR - Instrument Flight Rules Practice Test