Risk Management & Site Safety Flashcards
7 cards from real IFC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Risk Management & Site Safety flashcards as text
When a firestop contractor discovers that a previously installed penetration seal has been disturbed by another trade, what is the FIRST action that should be taken?
Answer: Document the disturbance and notify the general contractor
Documenting the disturbance and notifying the general contractor ensures proper accountability, maintains the audit trail, and allows for coordinated repair scheduling.
Which OSHA standard most directly governs personal fall protection requirements for firestop installers working on elevated platforms?
Answer: 29 CFR 1926.502
29 CFR 1926.502 establishes fall protection systems criteria and practices for construction, covering guardrails, safety nets, and personal fall arrest systems.
A pre-installation risk assessment for firestopping should include which of the following elements?
Answer: Substrate conditions, access constraints, adjacent trade conflicts, and hazardous material exposure
A thorough pre-installation risk assessment covers substrate conditions, access limitations, trade sequencing conflicts, and potential exposure to hazardous materials like asbestos.
What is the purpose of a Job Hazard Analysis (JHA) specific to firestop installation?
Answer: To identify task-specific hazards and establish safe work procedures before work begins
A JHA breaks down each installation task to identify potential hazards and prescribe controls before workers are exposed to those risks.
When working in a confined space to install firestop materials, which condition would classify the space as a Permit-Required Confined Space (PRCS)?
Answer: The space contains a hazardous atmosphere or has a configuration that could trap a worker
A confined space is permit-required when it contains a hazardous atmosphere, material that could engulf an entrant, or an internal configuration that could trap a worker.
During a hot work permit review, what firestopping-related concern should be specifically addressed?
Answer: Whether existing firestop seals near the hot work area could be damaged by heat or sparks
Hot work can damage or degrade nearby firestop seals through direct heat, sparks, or spatter, potentially creating unintended fire spread pathways.
Which of the following best describes the role of a competent person in firestop installation site safety?
Answer: Someone capable of identifying existing and predictable hazards and who has authority to take prompt corrective action
OSHA defines a competent person as one who can identify hazardous or dangerous conditions and has the authority to eliminate them immediately.