Firestop Systems and Materials Flashcards
7 cards from real IFC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Firestop Systems and Materials flashcards as text
Which UL system designation prefix specifically identifies firestop systems tested for use in concrete floor assemblies?
Answer: C-AJ series
The C-AJ series in the UL Fire Resistance Directory covers firestop systems designed for concrete floor assemblies.
What is the primary purpose of an intumescent firestop collar installed around a plastic pipe penetration?
Answer: To expand under heat and crush the melting pipe shut, blocking fire passage
Intumescent collars swell dramatically when heated, compressing the collapsing plastic pipe and sealing the opening against fire and smoke.
According to ASTM E814, what does the 'T' rating of a firestop system measure?
Answer: Time before combustible materials on the unexposed side reach 325°F above ambient
The T (temperature) rating is the time until the unexposed surface temperature rises 325°F above the starting ambient temperature at the penetration.
A firestop mortar is most appropriately used to seal which type of penetration?
Answer: Large bundled cable trays or multiple conduit groupings
Firestop mortars are ideally suited for large, irregular openings such as those containing cable trays or multiple grouped conduits because the material can be poured or packed to fill complex voids.
What condition makes a firestop system listing inapplicable for a specific field installation?
Answer: The pipe material is the same but the wall thickness exceeds the listed range
All installation parameters—including wall thickness of the penetrating item—must fall within the listing's tested range; exceeding any limit voids the listing.
Which standard governs the fire-resistance testing of through-penetration firestop systems in the United States?
Answer: ASTM E814 / UL 1479
ASTM E814 (and its equivalent UL 1479) is the standard test method for through-penetration firestop systems, establishing F and T rating procedures.
When a listed firestop system requires mineral wool backing, what function does the mineral wool primarily serve?
Answer: It provides a substrate and support for the firestop sealant applied over it
Mineral wool backer in a firestop system acts as a support matrix that holds the applied sealant in place and ensures proper depth, but the sealant itself provides the primary seal.