Construction Docs and Specs Flashcards
6 cards from real IDFX practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Construction Docs and Specs flashcards as text
An interior designer specifies a particular brand and model number for a commercial-grade carpet. This is an example of which type of specification?
Answer: Proprietary specification
A proprietary specification calls out a specific manufacturer's product by name, brand, and model number. This type of specification gives the designer the most control over the final product.
In a set of construction drawings for a corporate office, which drawing would illustrate the layout of light fixtures, switches, and outlets on the ceiling?
Answer: Reflected Ceiling Plan (RCP)
A Reflected Ceiling Plan (RCP) is a drawing that shows the items located on the ceiling of a room as if the ceiling were reflected onto the floor below. It includes lighting, smoke detectors, sprinklers, and any other objects on the ceiling.
During the construction of a retail space, the client decides to add a custom millwork display that was not in the original contract. Which document must be created and signed to formalize this change?
Answer: Change Order
A change order is a formal, written amendment to a construction contract that modifies the agreed-upon scope, cost, or schedule. Since the contract has already been signed, a change order is required to document and approve the addition of the new millwork.
Which of the following is the primary purpose of construction specifications in an interior design project?
Answer: To serve as a detailed, written description of materials, workmanship, and quality standards.
Specifications are comprehensive written documents that detail the technical requirements for materials, products, installation procedures, and quality standards, complementing the information shown on the drawings.
An interior designer is preparing a construction drawing set. In which type of drawing would the designer typically show the vertical dimensions and design of custom cabinetry?
Answer: Interior Elevation
Interior elevations are scaled drawings that show a vertical surface from a straight-on view. They are used to illustrate the design of walls, including the placement of elements like custom cabinetry, trim, and wall finishes, along with their vertical dimensions.
The Construction Specifications Institute (CSI) MasterFormat® is used to:
Answer: Organize construction specifications and written project information into a standard format.
CSI MasterFormat® is the industry standard in North America for organizing written construction documents, such as specifications, into a standardized system of divisions and sections. This allows for clear communication and easy location of information.