IDA Paint Correction and Machine Polishing 2

Question 1

What is the correct procedure when starting machine polishing on a new panel?

Accepted Answer

Spread the product first at low speed before increasing

Answer

Spreading the compound or polish at low speed first prevents product from being flung off the pad and ensures even distribution before increasing machine speed.

Question 2

In IDA training, what is the 'cross-hatch' polishing technique?

Accepted Answer

Alternating vertical and horizontal passes over a work area

Answer

The cross-hatch technique alternates vertical and horizontal machine passes to ensure uniform defect removal and avoid directional marring.

Question 3

Which product should be used after compounding to refine the surface before applying a coating or wax?

Accepted Answer

Finishing polish

Answer

A finishing polish is used after compounding to refine the surface, remove light haze, and maximize gloss before protection is applied.

Question 4

What does 'RIDS' stand for in the context of paint defects?

Accepted Answer

Random Isolated Deep Scratches

Answer

RIDS stands for Random Isolated Deep Scratches, which are individual scratches that penetrate below the clear coat and generally cannot be fully polished out.

Question 5

Why should a detailer inspect paint under a high-intensity light source before polishing?

Accepted Answer

To identify all existing defects and plan the correction approach

Answer

High-intensity lighting reveals all surface defects including swirls, scratches, and oxidation, allowing the detailer to plan the correct products and techniques.

IDA - International Detailing Association Practice Test

IDA - International Detailing Association Practice Test

IDA Paint Correction and Machine Polishing 2