ICC System Architecture and Design 2

Question 1

Under the IBC, what is the minimum required fire-resistance rating for a building separation wall between two structures of different construction types when one is Type I-A and the other is Type V-B?

Accepted Answer

3 hours

Answer

A fire wall separating buildings of different construction types must provide a rating equal to the higher-rated construction type separation requirement, which is 3 hours for Type I-A vs. Type V-B.

Question 2

Which IBC occupancy group classification applies to a building used primarily for the storage of moderate-hazard combustible materials?

Accepted Answer

Group S-1

Answer

Group S-1 (Moderate-Hazard Storage) applies to buildings used for storage of combustible materials not classified as low-hazard.

Question 3

In ICC structural design, what does the term 'load path' refer to?

Accepted Answer

The sequence through which loads are transferred from the roof to the foundation

Answer

A load path is the continuous route through which gravity and lateral loads are transferred from the point of application down through the structural system to the foundation.

Question 4

According to the IBC, what is the maximum allowable floor area for a single-story Group B occupancy building of Type II-B construction without fire sprinklers?

Accepted Answer

19,000 sq ft

Answer

Per IBC Table 506.2, a single-story Group B occupancy with Type II-B construction without sprinklers has a maximum allowable area of 19,000 square feet.

Question 5

What is a 'podium' construction type as referenced in the IBC?

Accepted Answer

A concrete or heavy timber base supporting lighter construction above

Answer

A podium is a Type IA or IB concrete or masonry base structure upon which lighter wood-frame or other construction is built, allowing greater height and area allowances.

(ICC) International Code Council Practice Test

(ICC) International Code Council Practice Test

ICC System Architecture and Design 2