Heat Pump Technology Flashcards
7 cards from real HVAC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Heat Pump Technology flashcards as text
What is the primary advantage of a variable-speed compressor in a heat pump?
Answer: It modulates capacity to match load, improving efficiency
Variable-speed compressors adjust their output to match the heating or cooling demand, reducing energy consumption and improving comfort.
In a cold climate heat pump, what is the purpose of flash injection (vapor injection) in the refrigerant circuit?
Answer: To inject refrigerant vapor mid-compression to boost heating capacity at low outdoor temperatures
Vapor injection introduces refrigerant vapor into an intermediate stage of the compressor, boosting heating capacity and efficiency at very low outdoor temperatures.
What does the term 'balance point' mean in heat pump operation?
Answer: The outdoor temperature at which heat pump capacity equals building heat loss
The balance point is the outdoor temperature at which the heat pump's heating capacity exactly meets the building's heat loss, below which supplemental heat may be needed.
A heat pump is operating in heating mode and the outdoor coil is heavily frosted. What is the MOST likely effect on system performance?
Answer: Reduced airflow across the outdoor coil, decreasing efficiency and capacity
Heavy frost blocks airflow across the outdoor coil, reducing heat transfer and dropping suction pressure, which decreases both capacity and efficiency.
Which refrigerant is most commonly used in modern residential heat pumps in the United States?
Answer: R-410A
R-410A replaced R-22 as the standard residential heat pump refrigerant due to its higher efficiency and zero ozone depletion potential.
When a heat pump switches from cooling to heating mode, which component reverses refrigerant flow direction?
Answer: Reversing valve (4-way valve)
The reversing valve (four-way valve) redirects refrigerant flow to switch the roles of the indoor and outdoor coils between heating and cooling modes.
What is the typical Coefficient of Performance (COP) range for an air-source heat pump in heating mode at 47°F outdoor temperature?
Answer: 2.0 to 4.0
Air-source heat pumps typically achieve COPs of 2.0 to 4.0 at 47°F, meaning they deliver 2 to 4 units of heat energy for every unit of electrical energy consumed.