Electrical Controls and Safety Flashcards

What color is the common wire (C-wire) in a standard HVAC thermostat wiring scheme?

Answer: Blue or Black

The C-wire (common wire) is typically blue or black and provides the return path for the 24V control circuit, allowing smart thermostats to receive continuous power.

In a standard thermostat wiring system, what does the 'Y' terminal control?

Answer: The compressor/cooling call

The Y terminal sends the cooling signal to the outdoor unit contactor coil, energizing the compressor and condenser fan when the thermostat calls for cooling.

What type of motor is most commonly used for HVAC variable-speed blowers in high-efficiency systems?

Answer: ECM (Electronically Commutated Motor)

ECM (Electronically Commutated Motor) blowers are brushless DC motors that can vary speed precisely and are 60-70% more efficient than standard PSC motors.

What is the purpose of a lockout/tagout (LOTO) procedure in HVAC service?

Answer: To isolate and de-energize equipment to prevent accidental startup during maintenance

LOTO procedures ensure that hazardous energy (electrical, mechanical, refrigerant pressure) is isolated and locked before service personnel work on equipment, preventing serious injury.

What does a sequencer do in an electric furnace?

Answer: Staggers the energization of multiple heating elements to prevent large current spikes

A sequencer uses a bimetal element to introduce a time delay between energizing each heating strip, preventing all strips from turning on simultaneously and causing large current inrush.

What happens when a flame sensor in a gas furnace is coated with oxidation or debris?

Answer: The furnace ignites but shuts down after a few seconds on lockout

A dirty flame sensor cannot accurately detect the burner flame and sends a weak signal to the control board, causing the board to close the gas valve and lock out after a brief trial.