Workplace Safety and Risk Management in SPD Flashcards
7 cards from real HSPA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Workplace Safety and Risk Management in SPD flashcards as text
What is the minimum required PPE for personnel working in the decontamination area?
Answer: Fluid-resistant gown, gloves, face shield or mask/goggles combination, and shoe covers.
The decontamination area poses a high risk of exposure to bloodborne pathogens and other contaminants through splashes and aerosols. OSHA requires comprehensive PPE, including a fluid-resistant gown, utility gloves, a full face shield (or a combination of a mask and goggles), and fluid-resistant shoe covers to protect the worker's skin, eyes, and mucous membranes.
Where would a sterile processing technician find detailed information about the hazards, handling, and emergency procedures for a specific chemical detergent?
Answer: On the chemical's Safety Data Sheet (SDS).
The Safety Data Sheet (SDS), formerly known as MSDS, is a document required by OSHA's Hazard Communication Standard. It provides comprehensive information about a chemical's properties, health hazards, protective measures, and safety precautions for handling, storing, and transporting it.
To prevent ergonomic injuries when lifting heavy instrument trays, a technician should:
Answer: Bend at the knees and lift with their leg muscles, keeping the back straight.
Proper lifting technique is essential for preventing musculoskeletal injuries. Technicians should use the strong muscles of their legs, not their back, by bending at the knees and keeping the load close to their body with a straight back.
In the event of a fire in the SPD, what does the acronym "RACE" stand for?
Answer: Rescue, Alarm, Contain, Extinguish/Evacuate
RACE is a widely used fire safety protocol. It stands for: Rescue anyone in immediate danger; Alarm by activating the nearest fire alarm and calling the facility's emergency number; Contain the fire by closing doors and windows; and Extinguish the fire if it is small and you are trained, or Evacuate the area.
What is the correct procedure for handling a contaminated scalpel blade found on an instrument tray in decontamination?
Answer: Use forceps or another tool to remove the blade and dispose of it in a puncture-resistant sharps container.
Sharps safety is paramount to prevent percutaneous injuries. A technician should never handle a contaminated sharp with their hands. A tool, such as forceps or a needle holder, must be used to safely remove the item and place it directly into a designated, puncture-resistant sharps container.
Which of the following is a critical safety requirement for the area around an Ethylene Oxide (EtO) sterilizer?
Answer: It must have dedicated ventilation systems and air monitoring for EtO levels.
Ethylene Oxide is a hazardous gas, and exposure is strictly regulated by OSHA. The EtO sterilizer area must have a dedicated, negative-pressure ventilation system that is exhausted directly to the outside. Continuous air monitoring is also required to detect leaks and ensure that employee exposure levels remain below the permissible exposure limit (PEL).
The OSHA Bloodborne Pathogen Standard requires healthcare facilities to:
Answer: Offer the Hepatitis B vaccine to at-risk employees at no cost.
A key component of the OSHA Bloodborne Pathogen Standard is the requirement for employers to make the Hepatitis B vaccine series available to all employees with occupational exposure, free of charge. This is a critical measure to protect healthcare workers from this serious infectious disease.