Risk Assessment and Management Flashcards
6 cards from real HSE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Risk Assessment and Management flashcards as text
Which of the following is the first step in the standard five-step risk assessment process recommended by the HSE?
Answer: Identify the hazards.
The first step in a risk assessment is to identify potential hazards in the workplace. This involves looking for anything that could potentially cause harm.
A safety manager is deciding between a qualitative and a quantitative risk assessment for a complex chemical processing plant with significant potential for a major accident. Which approach is more appropriate and why?
Answer: Quantitative, because it uses numerical data to provide a more objective and detailed analysis of severe risks.
For high-stakes, complex risks where data is available, a quantitative risk assessment is more appropriate. It uses numerical probabilities and consequence values to provide an objective, data-driven analysis essential for making informed decisions about severe hazards.
In the hierarchy of controls, which of the following is considered the most effective method for managing risk?
Answer: Elimination
Elimination is the highest level in the hierarchy of controls and the most effective because it physically removes the hazard from the workplace, thus removing the associated risk entirely.
A risk matrix is a tool used to prioritize risks by plotting:
Answer: The likelihood of a hazard occurring against the severity of its potential impact.
A risk matrix is a visual tool that assesses and prioritizes risks based on two key dimensions: the likelihood (or probability) of the risk event occurring and the potential impact (or severity) of its consequences.
The principle of ALARP (As Low As Reasonably Practicable) requires that risks are reduced until:
Answer: The cost and effort to reduce the risk further would be grossly disproportionate to the safety benefit gained.
The ALARP principle states that risks should be reduced to a level that is 'as low as reasonably practicable'. This means balancing the risk against the sacrifice (in terms of time, money, or trouble) needed to reduce it further. The reduction must continue until the cost of further measures is grossly disproportionate to the additional risk reduction achieved.
What is the primary difference between a general Risk Assessment and a Job Safety Analysis (JSA)?
Answer: A Risk Assessment has a broad scope covering overall workplace risks, whereas a JSA is narrowly focused on the hazards of a specific task.
The key difference is the scope. A Risk Assessment evaluates a wide range of overall risks in a workplace, system, or process. A Job Safety Analysis (JSA) or Job Hazard Analysis (JHA) is more granular, focusing on breaking down a specific job or task into steps to identify and control the hazards associated with each step.