Top Rated Home Inspector Flashcards
7 cards from real Home Inspector Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Top Rated Home Inspector flashcards as text
A home inspector observes that bathroom exhaust fans vent into the attic space rather than to the exterior. What is the concern?
Answer: Moisture-laden air can cause condensation, mold, and wood rot in the attic
Venting exhaust fans into the attic introduces warm, humid air that condenses on cooler surfaces, fostering mold growth and structural damage.
What does 'kickout flashing' protect against in residential construction?
Answer: Diverts water away from the wall where a roof slope meets a vertical wall
Kickout flashing deflects roof runoff away from the wall cladding and into the gutter, preventing water intrusion at this vulnerable intersection.
Which of the following is NOT within the standard scope of a residential home inspection?
Answer: Determining the exact remaining lifespan of a roof in years
Home inspectors assess current condition and visible defects but cannot predict exact remaining service life of components.
What is the significance of a 'S-trap' in plumbing, and why do inspectors flag it?
Answer: It can lose its water seal through siphoning, allowing sewer gases into the home
An S-trap can self-siphon and lose its water seal, permitting toxic and odorous sewer gases to enter the living space.
During an inspection, a home inspector discovers asbestos-containing floor tiles that are in good condition. What is the appropriate recommendation?
Answer: Monitor the tiles and leave them undisturbed; removal is only needed if they become damaged
Intact asbestos-containing materials that are not friable pose minimal risk; disturbance or removal can actually release more fibers.
What is the primary function of a pressure relief valve (PRV) on a water heater?
Answer: To release excess pressure and prevent the tank from exploding
The T&P (temperature and pressure) relief valve opens automatically to release pressure if the tank overheats or pressure exceeds safe limits, preventing a catastrophic rupture.
A home inspector notes that the main electrical service panel is located inside a bathroom closet. Why is this a concern?
Answer: Moisture in bathrooms can damage electrical components and create shock hazards
Electrical panels must not be located in bathrooms because moisture and steam create shock and corrosion hazards, and is prohibited by the NEC.