Quality Assurance & Compliance Flashcards
7 cards from real HCC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Quality Assurance & Compliance flashcards as text
During healthcare construction, a water intrusion event occurs above a sterile processing area. What is the MOST critical immediate concern?
Answer: Preventing microbial contamination and notifying infection control personnel
Water intrusion in sterile or high-risk areas poses an immediate infection control risk; microbial growth prevention and infection control notification are the top priorities.
ASHRAE 170 specifies minimum air change rates for healthcare spaces. What is the primary reason operating rooms typically require 20+ air changes per hour (ACH)?
Answer: To dilute and remove airborne contaminants and maintain positive pressure
High ACH rates in ORs dilute airborne pathogens and particulates while maintaining positive pressure to protect the sterile surgical field.
A quality inspector notices that seismic bracing was omitted on suspended ceiling grid systems in a new hospital wing. Which standard most directly governs this requirement?
Answer: ASCE 7 Minimum Design Loads for Buildings and Other Structures
ASCE 7 governs seismic design requirements for building components, including suspended ceiling systems, with healthcare facilities subject to stringent seismic bracing requirements.
What is the purpose of a 'terminal cleaning' in the context of healthcare construction turnover?
Answer: A thorough disinfection cleaning of the completed construction area before patient occupancy
Terminal cleaning is a comprehensive, hospital-protocol disinfection of newly constructed or renovated spaces performed before patients are admitted.
Which type of testing is REQUIRED for medical gas systems immediately after installation, before connection to the facility piping system?
Answer: Standing pressure test (also called initial pressure test) with nitrogen
New medical gas piping must undergo a standing pressure test using dry nitrogen to verify system integrity before any medical gas is introduced.
A healthcare facility's construction project is nearing completion. The contractor conducts a 'mock survey' — what is the purpose of this exercise?
Answer: To simulate a regulatory inspection and identify compliance gaps before the official survey
A mock survey simulates a TJC or CMS inspection to proactively identify and correct deficiencies before the official regulatory survey.
Which document should a healthcare contractor maintain to demonstrate that all installed products meet specification requirements and were installed per manufacturer guidelines?
Answer: A submittal log with approved shop drawings, product data, and test reports
A comprehensive submittal log with approved shop drawings, product data, and test reports provides a traceable quality record for all installed materials.