Electronic Principles and Circuits Flashcards
6 cards from real Ham Radio General Class Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Electronic Principles and Circuits flashcards as text
What is the primary function of a mixer in a superheterodyne receiver?
Answer: To shift the incoming signal to an intermediate frequency
A mixer combines the incoming RF signal with a signal from a local oscillator. This process, called heterodyning, creates sum and difference frequencies. The difference frequency, known as the Intermediate Frequency (IF), is selected and amplified. This allows the majority of the receiver's amplifier and filter stages to operate at a fixed, lower frequency, which is more efficient and provides better selectivity.
In a high-voltage power supply, what is the main safety purpose of a bleeder resistor?
Answer: To discharge the filter capacitors when the power is turned off
High-voltage power supplies use large filter capacitors that can store a lethal charge long after the unit is turned off. A bleeder resistor is connected in parallel with the capacitors to provide a safe discharge path, reducing the voltage to a safe level and preventing accidental electric shock.
An operator is designing a circuit to provide a stable reference voltage for a digital logic circuit, despite variations in the main power supply voltage. Which of the following components is best suited for this voltage regulation task?
Answer: A Zener diode
A Zener diode is specifically designed to operate in reverse-bias breakdown. When the voltage across it reaches its 'Zener voltage,' it conducts and maintains a nearly constant voltage across its terminals, making it ideal for use as a voltage regulator or stable voltage reference.
What are the key characteristics of a common-emitter amplifier?
Answer: High voltage gain, high current gain, and an inverted output
The common-emitter amplifier configuration is widely used because it provides both significant voltage gain and significant current gain, resulting in high power gain. A characteristic feature is that the output signal is 180 degrees out of phase with the input signal, meaning it is inverted.
Which of the following best describes the operation of a Class C amplifier?
Answer: The amplifying device is biased to conduct for less than 180 degrees of the input cycle, resulting in high efficiency but poor fidelity.
A Class C amplifier is biased so the active device (transistor) conducts for significantly less than half (less than 180 degrees) of the input signal cycle. This results in brief pulses of current. While this creates high distortion, it also leads to very high efficiency (often over 80%). They are typically used in RF applications where a resonant tank circuit at the output restores the full sine wave.
When receiving a weak CW (Morse code) signal, an operator might use a very narrow audio filter. What is the primary purpose of such a filter?
Answer: To improve the signal-to-noise ratio by reducing interfering signals and noise on nearby frequencies.
A narrow audio filter, often a band-pass filter centered around a specific tone (e.g., 750 Hz), allows the desired CW signal to pass while attenuating signals and noise outside this narrow passband. This significantly improves the signal-to-noise ratio, making it much easier to copy a weak signal that might otherwise be unreadable.