Gutter Accessories and Components Flashcards
7 cards from real Gutter Company practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Gutter Accessories and Components flashcards as text
Which leaf guard type uses a fine mesh screen to filter debris while allowing water to pass through?
Answer: Micro-mesh guards
Micro-mesh guards have extremely fine perforations that block even small debris like pine needles and shingle grit while allowing water to flow through.
What is the purpose of a gutter outlet tube (drop outlet)?
Answer: To create an opening in the gutter bottom for connecting the downspout
The outlet tube (drop outlet) is inserted into a hole cut in the gutter bottom and provides the transition piece where water drops from the gutter into the downspout.
When two sections of gutters meet at an inside corner of a building, what fitting is used?
Answer: Inside miter
Inside miters are pre-formed corner fittings that join gutter sections at inside (concave) corners of a building, ensuring a watertight connection.
What is the main advantage of using foam gutter inserts as a leaf protection system?
Answer: They are easy to install and can be cut to fit any gutter size
Foam inserts are simple DIY-friendly products that can be cut to length and pushed into any gutter without tools, making them easy to install.
What is the purpose of a gutter apron (also called a drip edge)?
Answer: To direct water off the roof deck into the gutter and prevent fascia rot
A gutter apron or drip edge is a metal flashing installed at the roof edge that guides water into the gutter and keeps it from running behind the gutter onto the fascia board.
Which connector is used to join two straight sections of gutter together in the middle of a run?
Answer: Slip joint connector (union)
Slip joint connectors (unions) slide over the ends of two abutting gutter sections, joining them while allowing for slight thermal expansion and contraction.
What tool is most commonly used to seal joints and connections in gutter systems to prevent leaks?
Answer: Gutter sealant (silicone or polyurethane caulk)
Gutter-specific silicone or polyurethane sealants are applied to joints, end caps, and connections to create flexible, waterproof seals that resist temperature changes.