Gutter Company Safety and Equipment 2

Question 1

What tool is used to cut aluminum gutter sections to length at the job site?

Accepted Answer

Miter saw with a fine-tooth aluminum-rated blade or aviation snips/tin snips

Answer

A power miter saw with a non-ferrous metal blade or aviation snips are the standard tools for clean, accurate cuts on aluminum gutter sections.

Question 2

What is the purpose of a cordless drill's torque clutch setting when driving gutter screws?

Accepted Answer

It limits the torque applied so screws are not over-driven and the gutter is not deformed

Answer

Setting the torque clutch prevents over-driving screws, which would strip the screw hole, crack the gutter material, or deform the gutter channel.

Question 3

What safety precaution is required before using a pneumatic rivet gun on a ladder?

Accepted Answer

Ensure the air hose is routed so it cannot pull the ladder or cause loss of balance

Answer

The air hose must be managed carefully on a ladder so it cannot snag, pull, or cause the worker to lose balance, which is a leading cause of falls.

Question 4

What does a stud finder help locate when installing gutter hangers on a new fascia?

Accepted Answer

Rafter tails behind the fascia board for more secure fastener placement

Answer

Driving gutter screws into rafter tails (detectable through the fascia with a stud finder) provides much stronger attachment than screwing only into the fascia board.

Question 5

Which of the following is the correct way to pass tools or materials to a coworker on a ladder?

Accepted Answer

Use a tool belt, bucket, or material hoist — never throw items to someone on a ladder

Answer

Throwing objects to a worker on a ladder is dangerous because it can cause loss of balance; a tool belt, hoist, or second person handing items directly is required.

Gutter Company Practice Test

Gutter Company Practice Test

Gutter Company Safety and Equipment 2