Gutter Company Gutter Installation Basics 3

Question 1

What is the primary reason seamless gutters are preferred over sectional gutters?

Accepted Answer

They have fewer joints, reducing leak points

Answer

They are cheaper

Answer

They are easier to install alone

Answer

They come in more colors

Question 2

Which machine is used on-site to fabricate seamless gutters?

Accepted Answer

Seamless gutter machine (roll former)

Answer

Sheet metal brake

Answer

Hydraulic press

Answer

Miter saw with metal blade

Question 3

What is the standard width of a K-style residential gutter in the United States?

Accepted Answer

5 inches

Answer

3 inches

Answer

4 inches

Answer

6 inches

Question 4

When attaching a downspout outlet to the bottom of a gutter, what must be done to prevent leaks?

Accepted Answer

Seal the outlet flange with gutter sealant on the inside

Answer

Apply roofing nails around the outlet

Answer

Use sheet metal screws only

Answer

Apply flashing tape on the exterior

Question 5

What is the standard size for a rectangular downspout used with 5-inch K-style gutters?

Accepted Answer

2×3 inches

Answer

2×2 inches

Answer

3×4 inches

Answer

4×5 inches

Question 6

How should gutters be positioned in relation to the roof drip edge?

Accepted Answer

Below the drip edge so water flows into the gutter

Answer

Flush with the drip edge

Answer

Above the roofline shingles

Answer

At the same level as the fascia top