GSI GSI Firearm Cleaning & Maintenance 2

Question 1

What common firearm malfunction is often caused by insufficient lubrication or a dirty action?

Accepted Answer

Failure to feed or failure to eject

Answer

Excessive friction from inadequate lubrication or carbon buildup in the action commonly causes failures to feed or failures to eject in semi-automatic firearms.

Question 2

Which tool is used to push cleaning patches through the barrel from breech to muzzle?

Accepted Answer

Cleaning rod

Answer

A cleaning rod is a rigid or semi-rigid rod used to push patches and brushes through the barrel in the correct breech-to-muzzle direction to avoid damaging the crown.

Question 3

Why is it important to clean the chamber of a firearm during routine maintenance?

Accepted Answer

To remove carbon and residue that can cause feeding problems and affect headspace

Answer

Carbon buildup in the chamber can prevent cartridges from seating fully, cause extraction difficulties, and affect headspace, all of which can lead to dangerous malfunctions.

Question 4

What is the correct direction to push a cleaning rod through a rifle barrel to protect the muzzle crown?

Accepted Answer

Breech to muzzle

Answer

Cleaning from the breech toward the muzzle protects the critical muzzle crown from damage by the rod and prevents fouling from being pushed over the leade and forcing cone.

Question 5

What should a GSI instructor tell students about using household oils (like WD-40) as a long-term firearm lubricant?

Accepted Answer

WD-40 is a water displacer, not a long-term lubricant, and can leave residue that attracts fouling

Answer

WD-40 is a water-displacing product, not a dedicated gun lubricant; it evaporates quickly and leaves a residue that can attract dirt and gum up firearm actions over time.

(GSI) Gun Safety Instructor Practice Test

(GSI) Gun Safety Instructor Practice Test

GSI GSI Firearm Cleaning & Maintenance 2