Gold Design Gold Jewelry Techniques 2 — Questions and Answers
Question 1: What is the term for the process of creating a gold surface texture by dragging a sharp tool across it?
- Burnishing
- Engraving (Correct answer)
- Milling
- Planishing
Correct answer: Engraving
Engraving uses a sharp graver tool to cut decorative lines or patterns into the gold surface.
Question 2: Which joining method uses a lower-melting-point gold alloy to bond two gold pieces together?
- Welding
- Soldering (Correct answer)
- Brazing
- Riveting
Correct answer: Soldering
Soldering in jewelry uses a gold-alloy solder that melts at a lower temperature than the pieces being joined.
Question 3: What process involves polishing gold with a hard, smooth tool to produce a bright, mirror-like finish?
- Hammering
- Sandblasting
- Burnishing (Correct answer)
- Tumbling
Correct answer: Burnishing
Burnishing compresses and smooths the gold surface using a hard, polished tool pressed firmly against it.
Question 4: Which technique creates gold jewelry by building up layers of gold through electrodeposition over a form?
- Die casting
- Electroforming (Correct answer)
- Sand casting
- Investment casting
Correct answer: Electroforming
Electroforming builds up a thick, three-dimensional gold shell by electrodepositing metal over a conductive mandrel.
Question 5: What is the name for the process of drawing gold through progressively smaller holes to make wire?
- Rolling
- Wire drawing (Correct answer)
- Extrusion
- Spinning
Correct answer: Wire drawing
Wire drawing pulls gold through a series of successively smaller dies (drawplates) to reduce its diameter.
Question 6: Which technique involves inlaying colored enamel powder into etched gold recesses and firing it?
- Champlevé (Correct answer)
- Filigree
- Mokume-gane
- Milgrain
Correct answer: Champlevé
Champlevé is an enameling technique where recesses are carved or etched into gold, filled with enamel, and fired.
Gold Design Gold Jewelry Techniques 2
What is the term for the process of creating a gold surface texture by dragging a sharp tool across it?