Practice Test Geeks(GD&T) Geometric Dimensioning and Tolerancing Certification Practice Test
← All GD&T Flashcard Decks

GD&T ASME Y14.5 Standards and Drawing Interpretation Flashcards

6 cards from real GD&T practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 GD&T ASME Y14.5 Standards and Drawing Interpretation flashcards as text

  1. Reading a feature control frame left to right, what is the correct order of information?

    Answer: Geometric characteristic symbol, tolerance value with any modifiers, datum references in precedence order

    A feature control frame is read: (1) what is being controlled (symbol), (2) how much (tolerance + modifiers), (3) relative to what (datum references A, B, C).

  2. What does the circled M symbol (ⓜ) in a feature control frame indicate?

    Answer: Maximum Material Condition — bonus tolerance applies as the feature departs from MMC

    The encircled M specifies the MMC modifier, enabling bonus tolerance that grows as the actual feature size departs from its maximum material size.

  3. What is a basic dimension on an engineering drawing?

    Answer: A theoretically exact value, shown in a rectangular box, used to define the perfect geometry from which GD&T tolerance zones are measured

    Basic dimensions (shown boxed) are perfect, zero-tolerance values that locate or orient GD&T tolerance zones; all tolerance is captured in the feature control frame, not the dimension itself.

  4. What does a reference dimension (shown in parentheses) mean on a drawing?

    Answer: It is provided for information only and is not used for inspection or part acceptance

    Reference dimensions are informational, typically derived from other dimensions, and are never directly inspected or used to accept or reject a part.

  5. In a composite feature control frame with two segments, what does the upper segment control?

    Answer: The location of the entire pattern relative to the datum reference frame

    The upper segment of a composite callout controls where the pattern is located relative to the specified datums, while the lower segment refines the within-pattern accuracy.

  6. When a feature control frame is attached to an extension line or dimension line (not a leader to the surface), what does this indicate?

    Answer: The tolerance applies to the derived axis or center plane of the feature

    Attaching a feature control frame to a dimension line means the tolerance controls the derived axis or center plane, not the physical surface itself.

GD&T ASME Y14.5 Standards and Drawing Interpretation Flashcards — GD&T Study Cards with Answers