Fire Safety Regulations and Permit Requirements Flashcards
7 cards from real G60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fire Safety Regulations and Permit Requirements flashcards as text
A G60 certificate holder is working on a project that spans multiple days. What must happen regarding the hot work permit for each new workday?
Answer: A new hot work permit must be obtained each day before work begins
Hot work permits are valid for a single day or shift; a new permit is required each working day before torch operations resume.
Which of the following conditions would automatically prohibit torch operations in a space, regardless of permit status?
Answer: A flammable atmosphere or explosive concentration of vapors
No hot work, including torch operations, may be performed in a space where a flammable atmosphere or explosive vapor concentration exists, as ignition would be catastrophic.
Under FDNY regulations, the Certificate of Fitness for torch operations must be renewed:
Answer: Every 3 years
FDNY Certificates of Fitness, including the G60, are valid for 3 years and must be renewed before expiration to maintain authorization.
When torch cutting produces sparks that could fall to lower floors through openings, what is required under FDNY regulations?
Answer: The openings must be covered or protected with fire-resistant material
All floor openings through which sparks or molten metal could fall must be covered or protected with fire-resistant material before torch operations begin.
According to FDNY fire code requirements, compressed gas cylinders used in torch operations must be secured:
Answer: Upright and chained or strapped to a fixed object or cart
Compressed gas cylinders must be stored and used in the upright position and secured with chains or straps to prevent falling, which could cause valve damage and a catastrophic release.
Which statement about the G60 Certificate of Fitness is correct regarding its use at multiple job sites?
Answer: The single C of F is valid at any location within FDNY jurisdiction in NYC
The G60 Certificate of Fitness is issued to the individual and is valid for torch operations at any location within FDNY's jurisdiction throughout New York City.
After completing torch work in an area with concealed wall or ceiling spaces, what additional requirement does FDNY impose?
Answer: A fire watch must include inspection of accessible concealed spaces for smoldering
Concealed spaces can harbor smoldering materials that are not immediately visible, so fire watch protocols must include checking these spaces where accessible.