Practice Test Geeks(G60) Certificate of Fitness for Torch Use of Flammable Gases Practice Test
← All G60 Flashcard Decks

Fire Safety Regulations and Permit Requirements Flashcards

7 cards from real G60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Fire Safety Regulations and Permit Requirements flashcards as text

  1. Under FDNY regulations, a Certificate of Fitness for torch operations is required when using flammable gases in which setting?

    Answer: Any building or structure under FDNY jurisdiction

    The FDNY C of F for torch use applies to any building or structure within FDNY jurisdiction, not limited to specific building types or heights.

  2. Which agency issues the G60 Certificate of Fitness in New York City?

    Answer: NYC Fire Department (FDNY)

    The FDNY issues all Certificates of Fitness, including the G60 for torch use of flammable gases, through its Bureau of Fire Prevention.

  3. A hot work permit for torch operations must typically be obtained how far in advance of work beginning?

    Answer: On the same day work begins, before starting

    Hot work permits must be obtained and posted before torch operations begin, generally on the same working day.

  4. When a torch operation is completed for the day, the certificate holder must conduct a fire watch for a minimum of how long?

    Answer: 30 minutes

    FDNY regulations require a minimum 30-minute fire watch after torch operations cease to detect any smoldering materials.

  5. Which FDNY Fire Code section primarily governs hot work operations including torch use?

    Answer: FC 3505

    FC 3505 addresses welding, cutting, and other hot work operations, including torch use with flammable gases.

  6. If a G60 certificate holder observes an unexpected fire starting during torch work, what is the FIRST action required?

    Answer: Immediately extinguish the fire or activate the fire alarm

    The certificate holder must immediately stop work and either extinguish the fire using available extinguishers or activate the fire alarm system.

  7. Under NYC regulations, who bears primary responsibility for ensuring a hot work permit is obtained before torch operations begin?

    Answer: The Certificate of Fitness holder performing the work

    The individual holding the G60 Certificate of Fitness is primarily responsible for securing the required hot work permit before beginning operations.