Basic Codes & Regulations Flashcards
7 cards from real G60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Basic Codes & Regulations flashcards as text
What is the minimum distance a propane cylinder must be kept from an open flame or ignition source during torch operations according to safety codes?
Answer: 10 feet
Safety codes require propane cylinders to be positioned at least 10 feet away from open flames and ignition sources during torch operations.
Before starting torch work inside a building, a G60 certificate holder must inspect the work area primarily to identify:
Answer: Combustible materials that need protection or removal
A pre-work inspection must identify combustible materials in the vicinity so they can be removed or shielded before torch operations begin.
Under FDNY regulations, a 'fire watch' must remain at the torch work site after operations cease for a minimum of:
Answer: 30 minutes
FDNY requires a fire watch to monitor the work area for at least 30 minutes after torch operations end to catch any smoldering fires.
Which type of fire extinguisher is required to be immediately available during torch operations involving flammable gases?
Answer: Dry chemical ABC extinguisher
A dry chemical ABC-rated extinguisher is the required type at torch work sites because it is effective against the range of fire classes likely to occur.
A G60 certificate holder is responsible for ensuring which document is present at the job site during all torch operations?
Answer: The hot work permit
The hot work permit must be present and accessible at the job site throughout all torch operations as required by FDNY rules.
Propane and acetylene cylinders stored in the same area must be separated by a minimum distance of:
Answer: 20 feet or a 5-foot high firewall
Flammable and oxidizing gases must be separated by 20 feet or a 5-foot high, 30-minute fire-rated barrier per NFPA 51B and OSHA standards.
When is it permissible to use a torch in a space classified as a confined space without special precautions?
Answer: Never — confined spaces always require special precautions
Confined spaces always require atmospheric testing, ventilation, and a permit before torch work — no size or timing exception removes this requirement.