Fusion 360 Drawing and Documentation 3

Question 1

What is the recommended way to create an isometric view in a Fusion 360 drawing?

Accepted Answer

Use the Projected View command and select the 'Isometric' orientation option

Answer

Switch to the isometric sketch environment and trace the 3D model

Answer

Import a screenshot taken from the 3D model in isometric camera mode

Answer

Use the Section View command with a 45-degree cutting plane

Question 2

Which geometric dimensioning and tolerancing (GD&T) symbol is used to control the flatness of a surface in a Fusion 360 drawing?

Accepted Answer

⏥ (flatness symbol — two parallel lines)

Answer

⌀ (diameter symbol)

Answer

⊙ (position symbol)

Answer

∠ (angularity symbol)

Question 3

What is the function of the 'View Representation' setting when inserting a drawing view in Fusion 360?

Accepted Answer

It sets which saved position or visibility state of the model is displayed in the view

Answer

It controls the paper size and orientation of the drawing sheet

Answer

It determines the shading style — wireframe, hidden line, or shaded — of the view

Answer

It selects the projection standard (first-angle vs. third-angle) for the view

Question 4

How do you add a surface finish symbol (roughness symbol) to a face in a Fusion 360 drawing?

Accepted Answer

Use the Surface Texture command in the Drawing toolbar's Annotation panel

Answer

Right-click the surface in the 3D model and apply roughness before creating the drawing

Answer

Draw the symbol manually as sketch geometry on the drawing sheet

Answer

Surface finish symbols must be added in a separate CAM workspace annotation

Question 5

When adding a linear dimension to a drawing view in Fusion 360, how do you switch it from horizontal to vertical measurement?

Accepted Answer

Move the cursor above or below the selected geometry instead of to the side before clicking to place

Answer

Type 'V' to toggle vertical mode while placing the dimension

Answer

Right-click during placement and select 'Change Orientation'

Answer

Hold Shift while clicking to lock the vertical direction

Question 6

What is the purpose of the title block in a Fusion 360 drawing?

Accepted Answer

To provide standard administrative information such as part name, revision, scale, material, and drafter

Answer

To list every component in the assembly with part numbers

Answer

To display the bill of materials with quantities

Answer

To summarize the GD&T tolerances applied throughout the drawing

Question 7

How do you create a half-section view in a Fusion 360 drawing to show both external and internal features simultaneously?

Accepted Answer

Use the Half Section View option in the Section View command dialog

Answer

Use the Full Section View command and then delete half of the hatching manually

Answer

Create two separate views and overlap them on the drawing sheet

Answer

Half-section views are not supported and must be created using a third-party plugin