Fusion 360 Sketching and Constraints 3

Question 1

What does the 'Project' command do in Fusion 360 sketch mode?

Accepted Answer

Projects edges or geometry from the model onto the active sketch plane

Answer

The Project command brings edges, vertices, or other geometry from existing bodies onto the sketch as reference lines.

Question 2

Which Fusion 360 sketch tool trims away a portion of a sketch entity between intersections?

Accepted Answer

Trim

Answer

The Trim tool removes the selected segment of a sketch entity up to its nearest intersection points.

Question 3

What does the 'Offset' tool do when used on a closed sketch profile in Fusion 360?

Accepted Answer

Creates a parallel copy of the profile at a specified distance

Answer

The Offset tool generates a new closed loop that is equidistant from the original profile at the defined offset value.

Question 4

In Fusion 360, which constraint makes two lines of equal length?

Accepted Answer

Equal

Answer

The Equal constraint forces selected lines or arcs to have the same length or radius.

Question 5

What is a 'Closed Profile' in Fusion 360 sketching?

Accepted Answer

A sketch where all lines form a fully enclosed boundary with no gaps

Answer

A closed profile is a sketch boundary where all endpoints connect, forming an enclosed area that can be extruded or revolved.

Fusion 360 Practice Test