Fusion 360 Sheet Metal Design 1

Question 1

Which Fusion 360 workspace is used to create sheet metal parts?

Accepted Answer

Sheet Metal workspace

Answer

The Sheet Metal workspace in Fusion 360 provides dedicated tools for creating flanges, bends, and flat patterns.

Question 2

What is a 'flat pattern' in Fusion 360 Sheet Metal Design?

Accepted Answer

The unfolded 2D representation of a sheet metal part for cutting

Answer

A flat pattern shows the sheet metal part fully unfolded into a single flat piece, including bend allowances, which is used for laser cutting or stamping.

Question 3

What does the 'K-factor' control in Fusion 360 sheet metal settings?

Accepted Answer

The location of the neutral bend line within the material thickness

Answer

The K-factor defines where the neutral axis sits within the material during bending, which directly affects bend allowance calculations.

Question 4

Which command in the Sheet Metal workspace adds a folded wall attached to an existing edge?

Accepted Answer

Flange

Answer

The Flange command creates a new sheet metal wall that bends away from a selected edge, optionally specifying angle, height, and bend radius.

Question 5

What is the purpose of 'bend relief' in sheet metal design?

Accepted Answer

To prevent tearing at corners when a flange is added near an edge

Answer

Bend relief cuts are small notches added at the ends of a bend to prevent material from tearing when the flange is formed.

Fusion 360 Practice Test

Fusion 360 Practice Test

Fusion 360 Sheet Metal Design 1