Fusion 360 3D Modeling Features 1

Question 1

What does the Extrude command do in Fusion 360?

Accepted Answer

Extends a 2D sketch profile into a 3D solid or surface

Answer

Extrude takes a closed 2D sketch profile and pushes it linearly to create a 3D solid, cut, or surface.

Question 2

Which Fusion 360 feature creates a solid by rotating a sketch profile around an axis?

Accepted Answer

Revolve

Answer

The Revolve command generates a 3D body by spinning a sketch profile around a specified axis by a given angle.

Question 3

What is the purpose of the 'Shell' command in Fusion 360?

Accepted Answer

Hollows out a solid body by removing one or more faces and creating a thin-walled shell

Answer

The Shell command removes selected faces and offsets the remaining surfaces inward to create a hollow part with uniform wall thickness.

Question 4

In Fusion 360, what does a 'Fillet' operation do to an edge?

Accepted Answer

Rounds the edge with a smooth curved transition

Answer

A Fillet rounds a sharp edge by replacing it with a smooth arc of a specified radius.

Question 5

Which Fusion 360 command cuts material from a body along a specified plane?

Accepted Answer

Split Body

Answer

Split Body divides a solid body into two separate bodies by cutting it along a face, plane, or surface.

Fusion 360 Practice Test