Fusion 360 3D Modeling Features 3

Question 1

What is the purpose of the 'Mirror' feature in Fusion 360's Solid toolbar?

Accepted Answer

Creates a reflected copy of a feature, body, or face across a mirror plane

Answer

The Mirror feature generates a symmetrical copy of selected features or bodies reflected across a specified plane.

Question 2

Which Fusion 360 command duplicates a feature or body in a linear or circular pattern?

Accepted Answer

Pattern

Answer

The Pattern command (Rectangular or Circular) replicates features or bodies at defined intervals along a line or around an axis.

Question 3

In Fusion 360, what does the 'Thicken' command do to a surface body?

Accepted Answer

Adds thickness to a surface to convert it into a solid body

Answer

Thicken takes a surface (no volume) and gives it a defined thickness, converting it into a solid body.

Question 4

What is the function of 'Offset Plane' in Fusion 360?

Accepted Answer

Creates a new construction plane parallel to an existing face or plane at a set distance

Answer

Offset Plane generates a new reference plane that is parallel to the chosen face or plane, offset by a specified distance.

Question 5

Which Fusion 360 feature adds a tapered angle to the walls of an extruded solid?

Accepted Answer

Draft

Answer

The Draft command applies an angular taper to selected faces relative to a pull direction, commonly used for mold design.

Fusion 360 Practice Test