FST Documentation 4

Question 1

Which element is required on every page of a fire protection system shop drawing submittal?

Accepted Answer

A revision block, drawing number, and project identification

Answer

Each page of a shop drawing must include a title block with project identification, drawing number, and revision block to ensure proper version control.

Question 2

In fire alarm documentation, a 'point-to-point' wiring diagram is primarily used to show what?

Accepted Answer

The electrical connections between individual devices and control panels

Answer

Point-to-point wiring diagrams detail the electrical connections, wire types, and terminal assignments between devices and the fire alarm control panel.

Question 3

What does a fire protection system 'acceptance test' document confirm?

Accepted Answer

The system operates correctly as installed and meets the design specifications

Answer

An acceptance test confirms through witnessed testing that the installed system performs as designed and complies with applicable codes before the building is occupied.

Question 4

When tagging a fire extinguisher after annual maintenance, what information must appear on the tag?

Accepted Answer

Date of service, technician's name or ID, and next service due date

Answer

NFPA 10 requires the maintenance tag to show the date of service, the identity of the technician, and when the next service is due.

Question 5

A fire protection technician completes an inspection and finds the system fully operational with no deficiencies. Which statement about documentation is correct?

Accepted Answer

A complete inspection report must still be prepared and provided to the building owner

Answer

Regardless of the inspection outcome, a full written report must be completed, signed, and provided to the building owner to comply with NFPA requirements.

(FST) Fire Safety Technician Certification Practice Test

(FST) Fire Safety Technician Certification Practice Test

FST Documentation 4