FST Documentation 3

Question 1

Which document serves as the primary legal record that a fire protection system was installed per approved plans?

Accepted Answer

As-built drawings

Answer

As-built drawings are revised to reflect the actual installed configuration and serve as the authoritative legal record of what was built.

Question 2

Under NFPA 72, the fire alarm system record of completion (Form 7.8.2) must be completed by whom?

Accepted Answer

The installing contractor and verified by the AHJ

Answer

NFPA 72 requires the installing contractor to complete and sign the record of completion, which the AHJ may then verify and countersign.

Question 3

A hydraulic calculation data nameplate must be permanently attached to which component of a sprinkler system?

Accepted Answer

The riser near the system control valve

Answer

NFPA 13 requires the hydraulic data nameplate to be attached to the sprinkler riser near the main control valve so it is readily accessible.

Question 4

When a sprinkler system undergoes a significant modification, what documentation update is mandatory before the system is returned to service?

Accepted Answer

Updated hydraulic calculations and as-built drawings

Answer

Any significant modification requires updated hydraulic calculations to confirm the system still meets design criteria, along with revised as-built drawings.

Question 5

What is the purpose of a 'deficiency report' in fire protection system documentation?

Accepted Answer

To formally document identified code violations or system deficiencies requiring correction

Answer

A deficiency report formally records any identified deficiencies, assigns priority, and tracks corrective action to ensure the system is brought into compliance.

(FST) Fire Safety Technician Certification Practice Test

(FST) Fire Safety Technician Certification Practice Test

FST Documentation 3