Inspection Procedures Flashcards
7 cards from real FST practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Inspection Procedures flashcards as text
During a fire sprinkler inspection, you notice a sprinkler head is painted over. What is the correct action?
Answer: Replace the painted sprinkler head immediately
Painted sprinkler heads must be replaced because paint alters the thermal element's activation temperature and response time.
Which NFPA standard governs the inspection, testing, and maintenance of water-based fire protection systems?
Answer: NFPA 25
NFPA 25 is the Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems.
A fire extinguisher inspection tag shows the last annual inspection was 13 months ago. What should the technician do?
Answer: Perform the annual inspection immediately
Annual inspections must occur at intervals not exceeding 12 months, so an overdue extinguisher must be inspected immediately per NFPA 10.
When inspecting a fire door, you find the door fails to latch when released from the open position. What is the correct classification of this deficiency?
Answer: Critical deficiency requiring immediate corrective action
A fire door that fails to latch is a critical deficiency because it cannot perform its fire containment function and must be corrected immediately.
How often must a main drain test be conducted on a wet pipe sprinkler system to verify water supply adequacy?
Answer: Annually
NFPA 25 requires an annual main drain test to verify that the water supply pressure has not changed significantly.
During inspection of a fire alarm control panel, the technician finds a 'trouble' signal displayed. What should be done first?
Answer: Identify and document the source of the trouble condition
The technician must first identify and document the source of the trouble condition before taking corrective action.
What minimum clear space must be maintained around fire hydrants to ensure accessibility for fire department operations?
Answer: 3 feet in all directions
NFPA 291 and local codes typically require a minimum 3-foot clear zone around fire hydrants for fire department access.