Practice Test Geeks(FST) Fire Safety Technician Certification Practice Test
← All FST Flashcard Decks

Documentation Flashcards

7 cards from real FST practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Documentation flashcards as text

  1. Which element is required on every page of a fire protection system shop drawing submittal?

    Answer: A revision block, drawing number, and project identification

    Each page of a shop drawing must include a title block with project identification, drawing number, and revision block to ensure proper version control.

  2. In fire alarm documentation, a 'point-to-point' wiring diagram is primarily used to show what?

    Answer: The electrical connections between individual devices and control panels

    Point-to-point wiring diagrams detail the electrical connections, wire types, and terminal assignments between devices and the fire alarm control panel.

  3. What does a fire protection system 'acceptance test' document confirm?

    Answer: The system operates correctly as installed and meets the design specifications

    An acceptance test confirms through witnessed testing that the installed system performs as designed and complies with applicable codes before the building is occupied.

  4. When tagging a fire extinguisher after annual maintenance, what information must appear on the tag?

    Answer: Date of service, technician's name or ID, and next service due date

    NFPA 10 requires the maintenance tag to show the date of service, the identity of the technician, and when the next service is due.

  5. A fire protection technician completes an inspection and finds the system fully operational with no deficiencies. Which statement about documentation is correct?

    Answer: A complete inspection report must still be prepared and provided to the building owner

    Regardless of the inspection outcome, a full written report must be completed, signed, and provided to the building owner to comply with NFPA requirements.

  6. What is the function of a 'cause and effect' matrix in a fire alarm system documentation package?

    Answer: It maps initiating device activations to the specific system outputs or actions they trigger

    A cause and effect matrix is a table that cross-references each initiating device with the outputs (alarms, door releases, HVAC shutdown, etc.) it activates.

  7. Under NFPA 1, which party is primarily responsible for maintaining fire protection system records and making them available for inspection?

    Answer: The building owner or operator

    NFPA 1 and most model fire codes place the responsibility for maintaining fire protection records on the building owner or operator.