Woodworking Safety Rules: Free Q&A

When operating the drill press, you must:

As the chuck key is put into the chuck, turn the machine on.

Before using, use the chuck key to tighten the pieces.

Only use your hands to tighten the bits in the chuck.

All of the above

Correct! Wrong!

Where should the user stand when using the table saw?

To the left of the blade at least 3'

Just across from the blade

Depending on whether the cut has been finished, slightly to the left or right of the blade.

None of the above

Correct! Wrong!

How high above your material should you set a table saw blade?

Greater than 1"

Roughly 1/4"

Around 1 to 2"

Correct! Wrong!

It is necessary to use a push stick while ripping a board on a table saw if the rip cut is less than:

4 inches

12 inches

10 inches

6 inches

Correct! Wrong!

When should all table saw adjustments be made?

As soon as the saw has totally stopped.

Your choice of blade will affect this.

After the table's fencing has been taken down.

As the saw is running

Correct! Wrong!

As you use the chop saw, be sure to:

You always make sure there is at least one square face and edge.

Do not attempt to cut too quickly; instead, let the blade do the work.

Between the board and the fence, there is no gap.

All of the above

Correct! Wrong!

Which outfit is inappropriate for a shop?

Tool apron

Fit clothes

Protective eyewear

Slippers

Correct! Wrong!

FREE Woodworking Safety Rules Questions and Answers

When operating the drill press, you must:

Where should the user stand when using the table saw?

How high above your material should you set a table saw blade?

It is necessary to use a push stick while ripping a board on a table saw if the rip cut is less than:

When should all table saw adjustments be made?

As you use the chop saw, be sure to:

Which outfit is inappropriate for a shop?

FREE Best Practices In Woodworking Questions and Answers

FREE Woodworking Tools And Equipment Questions and Answers

When operating the drill press, you must:

Where should the user stand when using the table saw?

How high above your material should you set a table saw blade?

It is necessary to use a push stick while ripping a board on a table saw if the rip cut is less than:

When should all table saw adjustments be made?

As you use the chop saw, be sure to:

Which outfit is inappropriate for a shop?

Premium Tests $49/moFREE November-2024

Premium Tests $49/mo
FREE November-2024