Dressmaking and Tailoring Fundamentals Q&A

It's the gap between the cutting line and the seam line.

Layouting

Pinning

Plain seam

Seam allowance

Correct! Wrong!

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

Blueprint designing

Sketching

Patternmaking

Garments construction

Correct! Wrong!

This is not a rule to follow while cutting garment components.

Set aside the cut component but do not remove the pins or patterns to keep it ready for marking.

Save all fabric scraps for future use.

The incorrect side of the material has transfer marks.

While cutting the fabric, walk around the table.

Correct! Wrong!

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

Seam ripper

Shears

Pointed scissors

Pinking shears

Correct! Wrong!

When two pieces of fabric are sewed together, the line formed is known as ________.

Placket

Pocket

Patch

Seam

Correct! Wrong!

You always have a _______________ while putting up patterns for a pair of men's trouser.

Trial layout

Middle layout

Side layout

Corner layout

Correct! Wrong!

To make an opening at one end of the seam, you must offer a ________.

Pocket

Pattern

Placket

Fastener

Correct! Wrong!

FREE Dressmaking and Tailoring Fundamentals Questions and Answers

It's the gap between the cutting line and the seam line.

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

This is not a rule to follow while cutting garment components.

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

When two pieces of fabric are sewed together, the line formed is known as ________.

You always have a _______________ while putting up patterns for a pair of men's trouser.

To make an opening at one end of the seam, you must offer a ________.

Related Post