FREE C33 Reading Blueprints and Interpreting Paint Specifications Questions and Answers

Question 1

On a set of architectural blueprints, where would you typically find detailed information about the types of paint, colors, and finishes required for various surfaces?

Accepted Answer

The finish schedule

Answer

The foundation plan

Answer

The electrical plan

Answer

The plumbing isometric view

Question 2

A paint specification calls for a surface to be prepared to 'SSPC-SP 1'. What does this standard require?

Accepted Answer

Solvent cleaning

Answer

Power tool cleaning to bare metal

Answer

White metal blast cleaning

Answer

Hand tool cleaning

Question 3

In a paint specification, what does the abbreviation 'DFT' stand for?

Accepted Answer

Dry Film Thickness

Answer

Durable Finish Texture

Answer

Direct Field Test

Answer

Dark Final Tone

Question 4

The finish schedule indicates that walls in the office (Room 101) are to be painted with 'P-2'. What is the next step to determine what 'P-2' is?

Accepted Answer

Refer to the paint legend or specifications for the definition of P-2.

Answer

Assume it means 'Paint, 2 coats'.

Answer

Ask the client what color they prefer.

Answer

Use the same paint as Room 102.

Question 5

How do you determine the height of the walls in a room when looking at a standard floor plan?

Accepted Answer

By looking at the elevation or section views.

Answer

It is written next to the room's square footage.

Answer

By measuring the thickness of the walls on the plan.

Answer

It is always a standard 8 feet unless noted otherwise.

Question 6

A specification sheet for a steel door states: '1 coat primer @ 1.5 mils DFT, 2 coats finish @ 2.0 mils DFT each'. What is the required total dry film thickness for the entire paint system?

Accepted Answer

5.5 mils

Answer

3.5 mils

Answer

4.0 mils

Answer

7.0 mils