ATT Sieve Analysis & Gradation

Question 1

What is the purpose of performing a sieve analysis on aggregates?

Accepted Answer

To determine particle size distribution.

Answer

Sieve analysis helps determine the particle size distribution, which affects the workability and strength of concrete.

Question 2

Which ASTM standard is used for sieve analysis of fine and coarse aggregates?

Accepted Answer

ASTM C136/C136M

Answer

ASTM C136/C136M is the standard method used for determining the particle size distribution of aggregates through sieving.

Question 3

What is the proper procedure if material is retained on the sieve frame edge?

Accepted Answer

Return it to the sieve for proper separation.

Answer

Aggregates caught on the sieve frame edge should be moved back into the sieve to ensure accurate mass distribution results.

Question 4

How is the percent passing a sieve calculated?

Accepted Answer

Sample weight minus retained weight divided by total sample weight, times 100.

Answer

The percent passing is calculated by subtracting the cumulative retained weight from the total sample and dividing by the total, then multiplying by 100.

Question 5

What is the maximum allowable material loss during sieve analysis per ASTM C136?

Accepted Answer

0.3%

Answer

Material loss should not exceed 0.3% of the original mass to ensure the accuracy of the test results.

(ATT) ACI Aggregate Testing Technician Practice Test

(ATT) ACI Aggregate Testing Technician Practice Test

ATT Sieve Analysis & Gradation