FREE Arkansas Driver’s License Questions and Answers
When driving on a highway and your engine dies, what should you do?
Explanation:
Suddenly applying force to the brakes can result in a rear-end accident with oncoming traffic, whose reaction time may be compromised. Rather, you ought to keep your car under control, signal that you're about to pull off the highway, and then gradually slow down to a safe place.
What's the meaning of this sign?
Explanation:
This sign is not for use in a school zone, but rather in a work or construction zone. Signs specific to school zones are typically pentagonal, or five-sided. School crossing guards may stop traffic in a school zone to assist students in crossing the street.
Make sure the head restraint touches the back of the head when adjusting the headrests. This prevents
Explanation:
Head restraints are intended to shield your neck in the event of a rear-end collision.
Headrests should be positioned so that, in case of an accident, the head restraint will make contact with the back of the head.
On a hot day, be cautious if it starts to rain because the pavement could become slippery for a short while. This is because
Explanation:
Rainwater loosens the oil deposits that are brought to the surface of the asphalt by heat. This increases the slippery condition of the road until more rain removes the oil.
If work zones do not have signs indicating reduced speed limits, you should
Explanation:
In a work zone, if there are no stated reduced speed limits, it's not necessarily required to slow down to less than 50 mph. Driving too slowly might occasionally be equally as risky as driving too quickly. Unless otherwise noted, drive at a safe speed for the road conditions and abide by the posted speed limit.
What should you do if an incoming vehicle is on your immediate left and you are going to pass a bicycle on your right?
Explanation:
There are instances when handling risks one at a time is necessary. When a car is approaching from behind and you are about to pass a bicycle, slow down and give the car space to pass so that you have more room for the bicycle. Next, shift to the left so that you have enough space to pass the bicycle.
Before making a right turn at an intersection, make sure there is no oncoming traffic
Explanation:
Make sure there is no oncoming or approaching traffic coming from the left or turning left into your path before making a right turn at an intersection. Additionally, give way to pedestrians crossing the road you are about to enter.
If you can't see more than 200 feet ahead in bad weather conditions, don't drive faster than
Explanation:
Although it's not the best speed according to the driver's handbook, driving at 25 mph in this scenario isn't always bad. 30 mph is the recommended speed when visibility is less than 200 feet. Traveling at this pace enables you to reach the destination in 4.5 seconds, providing plenty time for you to respond to any possible threats. You will need around 5.5 seconds to go 200 feet at 25 mph. Err on the side of caution if you believe that driving for an extra second will make you safer given your comfort level and the unique driving conditions.
When passing a motorcycle, you should
Explanation:
Legally, a motorcycle can occupy the entire lane. Therefore, you have to move into an adjacent lane in order to pass a motorcycle. The motorcycle's lane may not be shared with you.
What's the meaning of this sign?
Explanation:
A red slash inside a red circle indicates ""no."" This means that U-turns are not allowed.
If you are within _______ of a hill or curve at 55 mph, you are not allowed to pass.
Explanation:
It takes about a third of a mile to pass safely in the opposite lane at 55 mph. Although it's always a good idea to be cautious, at 55 mph, it's usually not required to leave half a mile of space.